What is modern paper making

Papermaking is the process of making paper, a substance which is used universally today for writing and packaging.



The modern process of your paper making


A modern paper mill is divided into several sections, roughly corresponding to the processes involved in making hand-made paper. Pulp is refined and mixed in water
with other additives to make a pulp slurry,the headbox of the papermachine (Fourdrinier machine) distributes the slurry onto a moving continuous screen, water drains from the slurry (by gravity or under vacuum), the wet paper sheet goes through presses and dries and is finally rolled into large rolls, often weighing several tons.
Another type of papermachine makes use of a cylinder mold that rotates while partially immersed in a vat of dilute pulp. The pulp is picked up by the wire and covers the mold as it rises out of the vat. A couch roller is against the mold to smooth out the pulp, and picks the wet sheet off of the mold.- wikipedia Papermaking


part 1 Debarking,and/or Recycling
To begin the process, logs are passed through a debarker, where the bark is removed, and through chippers, where spinning blades cut the wood into 1" pieces. Those wood chips are then pressure-cooked with a mixture of water and chemicals in a digester.

external image trunk01.jpg
debarker
Used paper is another important source of paper fiber. Thanks to curbside recycling programs in many communities, we recover 40% of all paper used in America for recycling and reuse. The paper is shredded and mixed with water.

Step 2: Pulp Preparation
The pulp is washed, refined, cleaned and sometimes bleached, then turned to slush in the beater. Color dyes, coatings and other additives are mixed in, and the pulp slush is pumped onto a moving wire screen.

Computerized sensors and state-of-the-art control monitor each stage of the process.

Step 3: Paper Formation
As the pulp travels down the screen, water is drained away and recycled. The resulting crude paper sheet, or web, is squeezed between large rollers to remove most of the remaining and ensure smoothness and uniform thickness. The semidry web is then run through heated dryer rollers to remove the remaining water.

Waste water is carefully cleaned and purified before its release or reuse. Fiber particles and chemicals are filtered out and burned to provide additional power for the mill.

Step 4: Paper finishing
The finished paper is then wound into large rolls, which can be 30 feet wide and weigh close to 25 tons. A slitter cuts the paper into smaller, more manageable rolls, and the paper is ready for use.

Papermaking is one of the most capital intensive industries in the nation, investing over $100,000 in equipment for each employee. The largest papermaking machines are over 32 feet wide, 550 feet long and can produce over 1,000 miles of paper a day.



Where or how is your topic relevant

anywhere that uses paper